Toshiba STRATA DK24 Manual page 434

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM47
TOLLRESTRlCTlONEXCEPTlONOFFlCECODESASSlGNEDBYAREACODE
(TABLESlAND2)
SELECT = Exception Table 1 - 8
Enter the number of the
exception table, 1 - 8. A new
exception table is needed for
each area code with office
codes that are exceptions
to restriction.
AREA CODE =
I\
DATA =
Enter the area code.
Enter or display office code(s).
See Note 3.
See Notes 4 and 5.
SELECT = Exception Table 1 - 8
Enter the number of the
2,3or4
exception table, 1 - 8 again. Enter 2 to add to the exception table.
Enter 3 to delete from the exception table.
Enter 4# to display the exception
table's office codes.
Exception Table (1 - 8) [7
Area Code
Exception Table (1 - 8) 0
Area Code
NOTES:
1.
2.
3.
4.
5.
6.
I
Record of Exception Office Codes (Data)
I I I I
I
For more information, see the instructions preceding the record
sheets.
Initialized data assigns no office codes to tables.
On/y one area code may be
entered per exception table.
TO
enter a range of office codes, key in
Several ranges or individual office
nnnT;;lnnnT;;lnnnmmnn
codes may be entered by separating
/
r-l-
them with a 1 key.
Low Office
High Office Denotes end of string
Copy as required,
Code Code
maximum eight exception tables.
2-135