Toshiba STRATA DK24 Manual page 359

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM16
ASSIGNING CO LlNEGROUPS(DIAL9 OR 81-88)
~l-~l~~~I-~l~-~~l-~l-~~
7 \
SELECT = CO Line Group
Key LEDs
On/y enter the last digit of
Specify which CO lines are assigned to the
the CO line group (1 - 8) to
group by setting LEDs as defined by the table
be defined, or enter 0 for
below. All LEDs with an "X" should be lit when finished.
Dial 9 group.
See Note 2.
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Program CO lines l-20 by setting LEDs l-20 with the handset on-hook;
Program CO lines 2 l-36 by setting LEDs 1 - 16 with the handset off-hook;
3. Initialized data assigns all CO lines to the Dial 9 group.
2-59