Ipsec/Ip Filtering Configuration Examples - Epson ES-C380W User Manual

Service name
SNMP
WSD
WS-Discovery
Network Scan
Network Push Scan TCP
Network Push Scan
Discovery
HTTP (Local)
HTTPS (Local)
HTTP (Remote)
HTTPS (Remote)
Parent topic:

IPsec/IP Filtering Configuration Examples

You can configure IPsec and IP filtering in a variety of ways, as shown in the examples here.
Receiving IPsec Packets Only
Use this example only for configuring a default policy.
• IPsec/IP Filtering: Enable
• Access Control: IPsec
• Authentication Method: Pre-Shared Key
• Pre-Shared Key: Enter a key up to 127 characters long
Receiving Scanning Data and Scanner Settings
Use this example to allow communication of printing data and printer settings from specified services.
Protocol type Local/Remote port
number
UDP 161/Any port
TCP Any port/5357
UDP 3702/Any port
TCP 1865/Any port
Any port/2968
UDP 2968/Any port
TCP 80/Any port
TCP 443/Any port
TCP Any port/80
TCP Any port/443
Configuring IPsec/IP Filtering
Controls these operations
Acquiring and configuring MIB from
applications such as Epson Device
Admin and the scanner driver
Controlling WSD
Searching for a product from WSD
Forwarding scan data from Epson
ScanSmart
Acquiring job information on push
scanning from Epson ScanSmart
Searching for a computer from
scanner
Forwarding Web Config and WSD
data to a HTTP or HTTPS server
Firmware update and root certificate
update on a HTTP or HTTPS client
213