Setting The Time To Initiate Auto Sleep After Finishing Operations - Canon ImageRunner 5000 Series User Manual

Setting the Time to Initiate Auto Sleep after Finishing Opera-
tions
If the machine is not operated (no keys are pressed) for a certain period of time, the control panel
power switch automatically switches OFF to save power. The machine then enters the Sleep mode.
NOTE
• The default setting is "1 hour".
1
Call up the desired screen as follows:
Additional Functions
key
2
Enter the desired Auto Sleep Time with the [ ]
or [ ] key, and press the [OK] key.
The Auto Sleep Time settings are 10, 15, 20, 30,
40, 50 minutes, 1 hour, 90 minutes and 2 to 4
hours (in one-hour increments).
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
6-26 Setting the Timer (Timer Settings)
Change Auto Sleep Time