Advertisement
Selecting whether or not to Accept Print Jobs of Unknown ID
You can set whether or not to print documents from a driver not correspondent with a stored
Department ID.
NOTE
• The [Accept jobs with unknown ID] key is only displayed when the network printer function is enabled.
• The default setting is "On".
1
Call up the desired screen as follows:
Additional Functions
key
NOTE
• When the System Manager ID/ Password is set, enter the System Manager ID and System Password
after pressing the [System Settings] key. Then, press the
• Set the Control Card when the Card Reader-C1 (option) is attached before proceeding to step 1. (See
"Inserting the Control Card," on p. 10-2.)
2
Select the [On] key.
NOTE
• When you select the [On] key, Department ID Man-
agement is enabled. (See "Entering the Depart-
ment ID and Password," on p. 10-4.)
• You do not need to operate the [On] [Off] key when
the Card Reader-C1 is attached.
3
Select the [On] or [Off] key, and press the [OK]
key.
When you select the [On] key:
Accepts print job from an unknown ID.
When you select the [Off] key:
Does not accept print job from an unknown ID.
Setting Specifications of the System Management ID (System Settings)
key.
ID
6-71
Advertisement
Chapters
