Setting The Time Taken For Display To Return To Basic Screen After Finishing Operations; Operations - Canon ImageRunner 5000 Series User Manual

Setting the Time Taken for Display to Return to Basic Screen
after Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the display returns
to the Basic screen (Standard setting) of the selected function.
This time is called "Auto Clear Time". Auto Clear Time can be set from 1 to 9 minutes in one-minute
increments. Auto Clear Time can also be set to "Off".
NOTE
• The default setting is "2 minutes".
• When "0" is set, Auto Clear function is not set.
1
Call up the desired screen as follows:
Additional Functions
key
2
Enter the desired time period with the Numeric
keys ( - ) or [–] and [+] keys, and press
0 9
the [OK] key.
The Auto Clear Time settings are from 0 to 9
minutes (in one-minute increments).
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Change Auto Clear Time
Setting the Timer (Timer Settings) 6-27