Canon ImageRunner 5000 Series User Manual page 261

4
Select the desired collate feature, and press
the [OK] key.
NOTE
• When you selected the [Staple] key, press the
[Next] key.
• The [Staple] key only appears when the Finisher
(option) is attached.
• The [Rotate] key only appears when the Finisher
(option) is not attached.
• The [Hole Punch] key only appears when the
Puncher Unit-B1 (option) unit is attached to the
Finisher.
• The [Offset] key only appears when the Finisher
(option) is attached.
When you select the [Staple] key:
Select the type of stapling( [Corner], [Double],
[Saddle Stitch] ), and press the [OK] key.
IMPORTANT
• You cannot set the Staple mode when printing on
transparencies, tracing papers, labels, and 3-hole
punch.
• The maximum number of papers which can be sta-
pled at a time is as follows:
- 11"x17"/ LGL/ LTRR: 30 sheets
- LTR
When you select the [Corner] key:
Select the staple position, and press the [OK]
key.
IMPORTANT
• STMTR-size paper cannot be corner-stapled.
4-64 Printing a Document Stored, in a Box after Changing the Settings
: 50 sheets
When the Finisher and the Punch-
er Unit-B1 are attached.
When the Finisher is not attached.