Specifying Document Size (Doc. Size Select) - Canon ImageRunner 5000 Series User Manual

4
Start scanning the original.
(See "Storing Originals in the Box," on p. 4-3.)
NOTE
• To cancel the settings, press the [Initial Settings] key. (The machine returns to the Standard Scanning
mode.)
• When you press the

Specifying Document Size (Doc. Size Select)

You can select the document size when scanning transparencies, or when specifying the document
size before scanning.
NOTE
• The default setting is "Auto".
1
Prepare to scan the original into the box following the procedure below.
Select the desired box number
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Press the [Doc. Size Select] key.
4-10 Scanning Originals into a Box
Reset
key, the display returns to Box selection screen.
Place the original
Document
Size Select