Canon ImageRunner 5000 Series User Manual page 516

System Management Mode of the
imageRUNNER 5000 Series
The following pages regarding the use and operations of the System Management mode, should be
cut out of the manual by the supervisor or the system manager.
You can set restrictions to the System Settings of the Additional Functions or manage the settings
set by other users by setting the System Settings of the Additional Functions. This mode is call the
System Management mode.
The operations which can be done in the System Management mode are as follows:
• Box Document Management
• Box Setting Management
Entering the System Management Mode
When Department ID Management is Enabled
Enter the System Manager ID in the [Depart-
ment ID], and the System Password in the
[Password] with the Numeric keys (
and press the
ID
The machine enters the System Management
Mode.
When Department ID Management is not Enabled
1
Additional Functions
Press the key.
-
0
key.
),
9
Reset
1 2 3
Guide
4 5 6
?
Additional Functions
7 8 9
Cle
Interrupt
0
ID C
i