Canon ImageRunner 5000 Series User Manual page 67

2
Neatly place your originals face up in the origi-
nal supply tray.
IMPORTANT
• Do not add or remove originals while the originals
are being scanned.
NOTE
• When enlarging LTR/ STMT-size originals to
11"x17"/ LGL-size paper, place your originals hori-
zontally.
• You can place different-size originals (i.e. LTR and
11"x17", STMT and LTRR) together in one group
in the feeder when you set the Different Size Orig-
inals mode. (See "Feeding Different-size Origi-
nals Together in the Feeder (Different Size
Originals)," on p. 3-43.)
• The scanned originals are output face down to the
original output area.
When scanning is completed, remove the original
sequentially from the original output area to avoid
paper jams.
1-16 Placing Originals
Original output area