Advertisement
4
Select the print paper size, and press the
[Done] key.
When you select the [StackBypass Setting] key:
Select the paper size, and press the [Next] key.
NOTE
• If there is a current job or a previously reserved job
which uses the stack bypass, select the [StackBy-
pass Setting] key and set the desired paper.
• To select A or B series paper size, press the
[A/B-size] key.
Select the paper type, and press the [OK] key.
5
Press the [Start Print] key.
If there is a current job or a previously reserved
job, the machine will start printing after that job is
completed.
(See "Printing Documents Stored in the Box," on
p. 4-6.)
NOTE
• To cancel the settings, press the [Initial Settings]
key. (The machine returns to the standard mode of
the Local Printing.)
• When you press the
the Box selection screen.
4-62
Printing a Document Stored, in a Box after Changing the Settings
Reset
key, the display returns to
Advertisement
Chapters
