Recalling A Previous Copy Job (Recall) - Canon ImageRunner 5000 Series User Manual

Recalling a Previous Copy Job
You can recall up to three previously set copy modes and make copies using these settings.
IMPORTANT
• One copy job is defined by setting the number of copies, exposure, zoom etc., and pressing the
Reset
key when the Auto Clear function is on, or by calling up a copy job stored in memory. If one of these
keys was not pressed, or if the Auto Clear function is not active, calling up a copy job by pressing the
[Recall] key is not possible.
• Once stored, the three copy jobs are held in memory even if the power is turned OFF.
• The Standard mode is not stored.
• Copy modes already stored is not stored.
1
Place your originals and press the [Special
Features] key.
2
Press the [Recall] key.
3-58

Recalling a Previous Copy Job (Recall)

(Recall)
Recall
Start
or