Advertisement
Printing Multiple Documents as One Document (Merge
Documents)
You can print multiple documents, such as scanned documents and documents sent from a
computer etc. as one document. This mode enables you to combine documents with different
settings as one document, so it is useful when you want to print documents as the following:
- When printing and stapling data created with different softwares, or data made by multiple people
as one document.
- When printing paste-up or transparency originals and data sent from a computer as one document
with the Booklet mode set.
IMPORTANT
• You can set this mode only when you select multiple documents.
• When you use this function to combine the documents, the settings for each document are cleared, and
prints are made with the Standard mode settings. When printing is completed, the settings of each docu-
ment return to the settings set when stored.
• You can change the settings of the Standard mode. (See "Setting a Standard Mode for Local Printing," on
p. 6-21.)
1
Specify the desired box following procedure below.
Select the desired box number
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Specify the documents in the order to be
merged, and press the [Print] key.
NOTE
• The selected documents are numbered in the order
specified.
• When you press the [Select All] key, you can select
all documents in the box (The key changes to the
[Clear Selection] key).
• You can cancel the selection by pressing the docu-
ment again.
• When you press the [Clear Selection] key, you can
cancel all selection of the documents (The key
changes to the [Select All] key).
Printing a Document Stored, in a Box after Changing the Settings
4-75
Advertisement
Chapters
