Advertisement
Additional Function
Common Settings
Standard Local Print Settings
Initialize Common Settings
Timer Settings
Date & Time Settings
Change Auto Sleep Time
Change Auto Clear Time
Time Until Unit Quiets Down
Daily Timer Settings
Low Power ModeTime
Adjustment/Cleaning
Zoom Fine Adjustment
Saddle Stitcher Staple
Repositioning
Saddle Stitch Position
Adjustment
Exposure Recalibration
Feeder Cleaning
Wire Cleaning
6-4
Additional Functions Settings Table
Available settings
Paper Select: Auto*/ Select paper supply
Copies: 1* to 2,000 sets
Finisher:
- With the Finisher
Do not Collate/ Collate/ Offset Collate*/ Group/
Offset Group/ Staple (Corner (TopLeft/ BtmLeft/
TopRight/ BtmRight), Double (Left/ Right))
- With the Finisher+Puncher Unit-B1
Do not Collate/ Collate/ Offset Collate*/ Group/
Offset Group/ Staple (Corner (TopLeft/ BtmLeft/
TopRight/ BtmRight), Double (Left/ Right))/
Hole Punch
- With the Copy Tray-C3
Do not Collate/ Collate*/ Rotate Collating/
Group/ Rotate Grouping
Two-sided Print : On/ Off*
Erase Document After Printing : On/ Off*
Merge Documents: On/ Off*
Initialize
Default setting (12-digit number)
Time Zone Settings: GMT—12:00 to GMT+12:00,
(GMT—5:00*)
Summertime Settings: On/ Off*
10, 15, 20, 30, 40, 50 min.,
1 hour*, 90 min., 2, 3, 4 hours
0 (no setting), 1 to 9 min., 2 min.*
0 (no setting), 1 to 9 min., 1 min.*
Sunday to Saturday, 00:00 to 23:59 in
one-minute increments
10, 15*, 20, 30, 40, 50 min.,
1 hour, 90 min., 2, 3, 4 hours
X/ Y: 0*, —1.0% to +1.0% in 0.1% increments
Press the [Start] key.
—2.0 mm to +2.0 mm (0 mm*) in 0.25 mm increments
9 Steps, 5*
Press the [Start] key.
Press the [Start] key.
Applicable
page
p. 6-21
p. 6-23
p. 6-24
p. 6-26
p. 6-27
p. 6-28
p. 6-29
p. 6-30
p. 6-31
p. 6-32
p. 6-33
p. 6-34
p. 8-30
p. 8-31
Advertisement
Chapters
