Setting Auto Clear Time - Canon Color imageCLASS MF9220Cdn Basic Operation Manual

7
Press (Main Menu) to return to the
Main Menu screen.
– To enter the Sleep mode manually, press
[Power] on the operation panel.
– The machine will not enter the Sleep mode
when:
• the machine is in operation
• the Processing/Data indicator is lit or flashing
• a message is on the display and the Error
indicator is flashing
• there is a paper jam in the machine
• the handset of the external telephone is off
the hook

Setting Auto Clear Time

If the machine remains idle for a certain period of time, the display returns to the standby mode (Auto Clear
function).
The default setting is <2 Minutes>.
– If <0> is selected, the Auto Clear mode is not set.
– After the Auto Clear mode initiates, the display returns to the screen specified in <Auto Clear Settings> in <Common Settings>. For
details, see "Setting the Function after Auto Clear Mode Initiates, " in the e-Manual.
1
Press (Main Menu).
2
Press the right Any key to select
<Additional Func.>.
– The machine will leave the Sleep mode when:
• you press [Power] on the operation panel
• a fax is received
• the handset of the external telephone is off
the hook
• a print job is sent from a computer, and the
print is started (printing starts but the display
remains off )
• a computer performs a scan through the
machine
3
Use [▼], [▲] or
<Timer Settings>, then press [OK].
Timer Settings
(Scroll Wheel) to select
1-23