Periodic Inspection Of The Breaker - Canon ImageRunner 5000 Series User Manual

Periodic Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current.
Be sure to test the breaker once or twice a month using the following procedure.
IMPORTANT
• Make sure that the main power is turned ON, and the machine is neither printing nor scanning before
starting periodic inspection of the breaker.
• If a malfunction occurs after a periodic inspection, contact your service representative.
1
Press the test button located at the bottom left
of this machine.
NOTE
• Push the test button with the tip of the ball-point
pen, etc.
• For details of the location of the breaker when the
Finisher is attached, see "Internal View," on p. 1-3.
2
The breaker lever automatically goes to OFF
(" " side). Confirm that the power is cut OFF.
IMPORTANT
• Do not use the test button to turn the power ON
and OFF.
• If the breaker lever does not go to OFF ("
side), repeat step 1.
• If the breaker lever does not go to OFF ("
side) despite carrying out the above procedure
two or three times, contact your service repre-
sentative.
3
Once you confirmed that the above operation
takes place, press the main power switch to
OFF (" " side).
26 Periodic Inspection of the Breaker
"
"