Slightly Reducing Images To Prevent The Original Periphery From Being Cut (Entire Image) - Canon ImageRunner 5000 Series User Manual

Slightly Reducing Images to Prevent the Original Periphery
from Being Cut (Entire Image)
When copying an original onto the same size of paper at a 100% copy ratio, the periphery of the
original may be cut slightly on the copy.
However, if you set the Entire Image mode, the copied image is automatically reduced slightly based
on the copy paper size and copy image size. As a result, the entire image is reproduced on the copy
without its periphery being cut off.
IMPORTANT
• In the Entire Image mode, combined use with the Booklet, Frame Erase, Image Combination, Image Sep-
aration, Image Repeat, and Mirror Image modes cannot be set.
1
Place your originals and press the [Copy
Ratio] key.
2
Press the [Entire Image] key, and press the
[Done] key.
3
Proceed to make copies in the usual way.
NOTE
• To cancel the setting, press the [Copy Ratio] and [Entire Image] keys in that order.
• You can also cancel the mode by pressing the
2-22 Changing the Copy Ratio (Copy Ratio)
Entire Image
Reset
key. (The machine returns to the Standard mode.)