Advertisement
Loading Paper
This section describes how to load paper in the paper drawers.
IMPORTANT
• When setting STMT-size paper, place it horizontally (STMTR).
NOTE
• The following size paper can be loaded in the paper drawers:
- Paper drawer 1, 2 : LTR
- Paper drawer 3, 4 : 11"x17"/ LGL/ LTR/ LTRR/ STMTR
• For details of available paper stock which can be loaded in the paper drawers, see "Available Paper
Stock," on p. 1-17.
Loading Paper in the Paper Drawers
When the selected paper has run out, or the selected
paper drawer runs out of paper during printing, the
display prompting you to load paper appears.
CAUTION
• When loading paper, take care not to cut your
hands on the edges of the paper.
IMPORTANT
• The message will also appear if the selected paper
drawer is not fully inserted into the machine. Prop-
erly insert the paper drawer.
NOTE
• You can check the amount of paper remaining in
the paper drawer by looking at the remaining paper
quantity display on the front of the paper drawer.
• If the above message appears during printing, the
remaining prints will automatically be made after
you load paper. When you select other feeding
position, the remaining prints will be made after you
press the [OK] key.
• To cancel printing, press the [Cancel] key.
7-2
Loading Paper
Advertisement
Chapters
