Placing An Original On The Platen Glass - Canon ImageRunner 5000 Series User Manual

Placing an Original on the Platen Glass

You should use the platen glass when scanning books, originals on heavy or lightweight paper,
transparencies etc., into memory.
1
Lift up the feeder.
IMPORTANT
• Lift up the feeder about 11-7/8" (30 cm), so that the
S-shaped sensor detaches from the feeder. Other-
wise, the size of originals may not be detected cor-
rectly.
• Return the original supply tray to its original posi-
tion if the original supply tray is pulled up.
2
Place your original.
The surface that you want to scan into memory
must be placed face down. Align the corner of the
original with the top left corner of the platen glass.
NOTE
• Place books and other bound originals on the
platen glass in the same way.
• When enlarging LTR/ STMT-size originals to
11"x17"/ LGL-size paper, place the original hori-
zontally on the platen glass and align it with the
LTRR or STMTR marks.
• When copying STMT-size original using the platen
glass, you need to set the "LTRR/STMT Original
Selection" in the Additional Functions. (See "Distin-
guishing LTRR-Size and STMT-Size Originals," on
p. 6-16.)
Placing Originals 1-13