Advertisement
4
Press the [Light] or [Dark] key to adjust the
scanning exposure.
NOTE
• Move the indicator above the [Light] and [Dark]
keys to the left to make the exposure lighter or to
the right to make the exposure darker.
5
Start scanning the original.
(See "Storing Originals in the Box," on p. 4-3.)
NOTE
• To cancel the setting, press the [A] key.
• To cancel the settings, press the [Initial Settings] key. (The machine returns to the Standard Scanning
mode.)
• When you press the
Automatic Adjustment of Exposure and Image Quality
1
Prepare to scan the original into the box following the procedure below.
Select the desired box number
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Press the [A] key.
The scanning exposure is automatically adjusted
to the level best suited to the quality of the
original.
NOTE
• If the original is a transparency, you may not be
able to use Automatic Exposure Control. If so,
adjust the scanning exposure using Manual Expo-
sure Control.
4-14
Scanning Originals into a Box
Reset
key, the display returns to the Box selection screen.
Place the original
A
Advertisement
Chapters
