Canon ImageRunner 5000 Series User Manual page 183

5
Select the memory key of the copy mode that
you want to erase, and press the [Next] key.
IMPORTANT
• Check the copy settings before you erase them.
NOTE
• The mode memory key where copy settings are
already stored shows a small, black square [ ] in
the lower right corner of the key.
• If you selected a memory key to which a copy
mode has already been stored, its settings are dis-
played.
• If there are more stored copy modes than currently
displayed, you can scroll the list using the [
[ ] keys.
6
The message on the right appears to confirm
that you want to erase the copy mode.
Select the [Yes] key.
The stored copy mode is erased.
NOTE
• The name of the memory key is not erased. For
details on how to change the name, see "Storing a
Memory Key Name," on p. 3-51.
• If you want to cancel erasing, select the [No] key.
The message "Erased." is displayed for about two
seconds on the touch panel display.
3-56 Storing/ Recalling Often Used Copy Settings in Memory (Mode Memory)
] or