Advertisement
4
Press the [XY Zoom] key.
5
Press the [X] and [Y] keys and enter each val-
ues for X and Y. Then press the [OK] key.
NOTE
• You can enter the numbers using the Numeric keys
(
-
) on the control panel.
0
9
• If you make a mistake when entering values, press
the [C] key in the touch panel, and enter the correct
values.
• Even if you entered the ratio with the Numeric keys
(
-
), you can change the entered values with
0
9
the [–] and [+] keys.
• If you enter a value outside the setting range, a
message prompting you to enter the appropriate
value will appear on the screen.
6
Start scanning the original.
(See "Storing Originals in the Box," on p. 4-3.)
NOTE
• To return the scanning ratio to 100%, press the [Direct] key.
• To cancel the setting, press the [Copy Ratio], [Other Zoom], [XY Zoom], and [Cancel] keys in that order.
• To cancel the settings, press the [Initial Settings] key. (The machine returns to the Standard Scanning
mode.)
• When you press the
Scanning Two-sided Originals (Two-sided Original)
This feature automatically turns over two-sided originals placed in the feeder to scan each side
separately.
IMPORTANT
• In the Two-sided Original mode, combined use with the Two-page Separation, Booklet Scanning, and
Image Combination modes cannot be set.
• Place the original horizontally when scanning originals such as LTRR/ STMTR size. If these originals are
placed vertically, the back side of the print will be printed upside down.
Reset
key, the display returns to the Box selection screen.
Scanning Originals into a Box
4-25
Advertisement
Chapters
