Setting The Auto Offline On/Off - Canon ImageRunner 5000 Series User Manual

Setting the Auto Offline On/Off
When the network is online, scanning is not possible with the Copy or Mail Box functions. By setting
Auto Offline is to "ON", the machine will automatically go Offline.
NOTE
• Auto Offline is only displayed when the Network Scan function is enabled.
• The default setting is "Off".
1
Call up the desired screen as follows:
Additional Functions
key
NOTE
• When the System Manager ID/ Password is set, enter the System Manager ID and System Password
after pressing the [System Settings] key. Then, press the
2
Select the [On] or [Off] key, and press the [OK]
key.
NOTE
• If Auto Offline is set to "ON", the machine automati-
cally goes offline with time set by Auto Clear. If
Auto Clear Time is set to "None" (0), the machine
will go Offline after approximately 2 minutes.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
6-74 Setting Specifications of the System Management ID (System Settings)
key.
ID