Canon ImageRunner 5000 Series User Manual page 181

2
Press the [Mode Memory] key.
3
Select the memory key where the copy setting
you want to recall is stored.
4
Check the copy settings stored to the memory
key. If the contents are correct, press the [OK]
key.
The display returns to the Special Features
screen.
NOTE
• Recalling a copy job from memory cancels the cur-
rent copy mode.
• After recalling a copy job from memory, you can
change its settings and make copies.
• If you press another memory key, the copy mode
stored in that key is recalled.
5
Press the [Done] key.
The display returns to the Basic Features screen.
3-54 Storing/ Recalling Often Used Copy Settings in Memory (Mode Memory)