Advertisement
4
Select the memory key where the scan setting
you want to recall is stored.
5
Check the scan settings stored to the memory
key. If the contents are correct, press the [OK]
key.
The display returns to the Special Features
screen.
NOTE
• "Recalling a scanning mode from memory cancels
the current scanning mode.
• After recalling a scanning mode from memory, you
can change its settings and scan.
• If you press another memory key, the scanning
mode stored in that key is recalled."
6
Press the [Done] key.
The display returns to the Scanning screen.
Erasing a Scanning Setting
1
Call up the Scanning screen as follows:
Select the desired box number
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
Nega/Posi
Scanning Originals into a Box
4-57
Advertisement
Chapters
