Advertisement
3
Select the document size, and press the
[Done] key.
IMPORTANT
• In the Automatic Document Size Selection mode,
combined use with the Booklet Scanning, Original
Frame Erase, Book Frame Erase, and Image Com-
bination modes cannot be set.
• You cannot select the [Auto] key when scanning the
following type of originals. Specify the size of the
document manually.
- Non-standard size originals
- Highly transparent originals such as transparen-
cies
- Originals with an extremely dark background
- Originals smaller than STMT in size
NOTE
• To select A or B series paper size, press the
[A/B-size] key.
4
Start scanning the original.
(See "Storing Originals in the Box," on p. 4-3.)
NOTE
• To cancel the settings, press the [Initial Settings] key. (The machine returns to the Standard Scanning
mode.)
• When you press the
Adjusting the Exposure and Image Quality before Scanning
the Originals (Scanning Exposure)
Manual Adjustment of the Scanning Exposure
You can manually adjust the scanning exposure to the most appropriate level for the original.
1
Prepare to scan the original into the box following the procedure below.
Select the desired box number
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
Reset
key, the display returns to Box selection screen.
Place the original
Scanning Originals into a Box
4-11
Advertisement
Chapters
