Advertisement
Additional Functions Settings Table
The following items can be stored or set in the Additional Functions screen. (* indicates factory
default setting)
NOTE
• In addition to the modes listed below, the [Printer Settings], [Network Settings], and [Remote UI On/Off]
modes are displayed when the network printer function is enabled.
• For details of the following settings, refer to the instruction manual for the relevant function.
- [Printer Settings] (See the PS/PCL Reference Guide.)
- [Remote UI On/Off] (See the Remote UI Guide.)
- [Network Settings] (See the Network Guide.)
Additional Function
Common Settings
Initial Function
Auto Clear Setting
Audible Tones
Inch Entry
Drawer Eligibility For
APS/ ADS
Store Paper Type
Energy Saver Mode
Function Key Wake Up
Energy Consumption in Sleep Mode
LTRR/STMT Original Selection
Tray Designation
Printing Priority
Standard Stack Bypass Settings
Available settings
Copy*/ Mail Box
Set System Monitor Screen as initial function:
On/ Off*
Set [Device] as the default for System Monitor :
On*/ Off
Initial Function*/ Selected Function
Entry Tone/ Error Tone/ Job Done Tone
(All On*/Off)
On*/ Off
Copy*/ Printer/ Mail Box/ Other
(Stack bypass: On/ Off*, Drawers: On*/ Off)
Copy: Consider Paper Type: On/ Off*
Paper drawer (1, 2), Paper Deck:
Plain*/ Heavy/ Recycled/ Color/ Letterhead/
Bond/ 3-Hole Punch
Paper drawer (3, 4):
Plain*/ Recycled/ Color/ Letterhead/ Bond/
3-Hole Punch
—10%*/ —25%/ —50%/ None
On/ Off*
Low*/ High
Distinguish Manually/ Use LTRR Format*/
Use STMT Format
Tray A: Copy*/ Printer*/ Other*
Tray B: Copy*/ Printer*/ Other*
1:Copy (Priority)/ 2:Printer/ 3:Other
On/ Off*
Additional Functions Settings Table
Applicable
page
p. 6-6
p. 6-7
p. 6-8
p. 6-9
p. 6-10
p. 6-12
p. 6-14
p. 6-15
p. 6-15
p. 6-16
p. 6-17
p. 6-18
p. 6-19
6-3
Advertisement
Chapters
