Setting Entry Tone, Error Tone, Job Done Tone - Canon ImageRunner 5000 Series User Manual

Setting Entry Tone, Error Tone, Job Done Tone

Gives you the choice of whether or not to sound audible tones. The following tones sound at the
following times:
Entry Tone : When pressing keys on the control panel or keys in the touch panel display
Error Tone : When a malfunction occurs (e.g. paper jam or operational error)
Job Done Tone : After the last copy has been made (e.g. outputting or stapling is completed)
NOTE
• The default setting is "On" for all tones.
1
Call up the desired screen as follows:
Additional Functions
key
2
Select the [On] or [Off] keys for "Entry Tone",
"Error Tone" and "Job Done Tone", and press
the [OK] key.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
6-8 Setting Specifications that are Common to Each Function (Common Settings)
Audible Tones