Checking The Print Result Or The Image Of The Stored Document (Sample Print) - Canon ImageRunner 5000 Series User Manual

Checking the Print Result or the Image of the
Stored Document (
You can print one set of print output when you want to check the image before printing, or when you
want to check the settings and the image data of the document stored in the box.
IMPORTANT
• The [Sample Print] key only appears when you set the Collate or Staple mode. This key does not appear
when the Group mode is set. In addition, when you select multiple documents, this key does not appear
unless you set the Merge Documents mode.
NOTE
• You can make a sample print even when the number of print sets is one.
1
Specify the desired document following procedure below.
Select the desired box number, then the desired document
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Press the [Sample Print] key, and press the
[Start Print] key.
Sample set printing starts and one print set is
made.
NOTE
• The number of print is not changed even when the
sample set is made.
3
Check the printed paper, and press the [Start
Print], [Cancel] or [Change Settings] key.
NOTE
• To output the prints, press the [Start Print] key.
• To cancel the printing, press the [Cancel] key.
• To change the settings, press the [Change Set-
tings] key.
4-88

Checking the Print Result or the Image of the Stored Document (Sample Print)

)
Sample Print
Sample Print