Canon ImageRunner 5000 Series User Manual page 382

Changing the Password and Impression Limit
1
Call up the desired screen as follows:
Additional Functions
key
NOTE
• When the System Manager ID/ Password is set, enter the System Manager ID and System Password
after pressing the [System Settings] key. Then, press the
• Set the Control Card when the Card Reader-C1 (option) is attached before proceeding to step 1. (See
"Inserting the Control Card," on p. 10-2.)
2
Press the [On] key, and press the [Store Dept.
ID/Password] key.
NOTE
• You do not need to operate the [On] [Off] key when
the Card Reader-C1 is attached.
Press the [Store Dept. ID/ Password] key when
the Card Reader-C1 is attached.
3
Use the [ ] and [ ] keys to display the Pass-
word you want to change. Then select the
Password, and press the [Edit] key.
Setting Specifications of the System Management ID (System Settings)
key.
ID
6-61