Advertisement
Erasing a Message Board
A message board is used to display messages for the users of this machine. The messages are
sent from the system manager using the utility software. You can erase a message displayed in the
message board.
NOTE
• The message board is only displayed when the network printer function is enabled.
1
Call up the desired screen as follows:
Additional Functions
key
NOTE
• When the System Manager ID/ Password is set, enter the System Manager ID and System Password
after pressing the [System Settings] key. Then, press the
2
Select the [Yes] or [No] key.
When you select the [Yes] key:
The message is not displayed.
When you select the [No] key:
The message remains displayed.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Setting Specifications of the System Management ID (System Settings)
key.
ID
6-73
Advertisement
Chapters
