Collating Copies (Finisher) - Canon ImageRunner 5000 Series User Manual

When "Hole Punch" is set:
Punches 2 or 3 holes in the copied sheets.
When you select 11"x17"/ LTR-size paper:
IMPORTANT
• [Hole Punch] can only be specified when the Finisher is equipped with the Puncher Unit-B1.
• The machine automatically selects the type of hole punch (2 or 3 holes) depending on the selected paper
size.
- 2 holes: LGL/ LTRR
- 3 holes: 11"x17"/ LTR
• Holes cannot be punched in transparencies, tracing papers, labels, and 3-hole punch.
When "Rotate" is set:
When originals of the same size are placed, the pages are aligned and the copy sets are deliv-
ered in alternating directions.
IMPORTANT
• You can only select LTR/ LTRR-size paper.
• [Rotate] can only be specified when the machine is not equipped with the Finisher (option).
When "Offset" is set:
Copies are shifted to the front and back respectively.
IMPORTANT
• [Offset] can only be specified when the machine is equipped with the Finisher (option).
• You cannot select STMTR-size paper.
2-50

Collating Copies (Finisher)

Original
Hole Punch
1
2
3
4
Original
Rotate
1
2
3
4
Original
Rotate
1
2
3
4
Copy
Copy
Copy