Reserving A Print Job Of A Document Stored In A Box While The Machine Is Warming Up (Auto Print) - Canon ImageRunner 5000 Series User Manual

3
After the machine has finished warming up, printing starts.
NOTE
• If warm up ends while scanning is still in progress, printing starts at that point.
• You can change the exposure during printing. (See "Changing the Exposure During Printing," on p. 5-2.)
Reserving a Print Job of a Document Stored in a Box while
the Machine is Warming Up (Auto Print)
1
Specify the desired document with the procedure below.
Select the desired box number, then the desired document
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
To print without changing the settings, press
the [Start Print] key. If you want to change set-
tings before making a print, press the [Change
P Settings] key and set the desired mode, then
press the [Start Print] key.
NOTE
• To make a sample print, press the [Sample Print]
key. (See "Checking the Print Result or the Image
of the Stored Document (Sample Print)," on p. 4-
88.)
• To erase the data after printing, press the [Print and
Erase] key.
• To print after changing the settings, see "Printing
a Document Stored, in a Box after Changing the
Settings," on p. 4-61.
5-6 Reserving a Job while the Machine is Warming Up
Auto Print