Advertisement
When you select the [Change Settings] key:
Change the desired settings, then press the
[Done] key.
NOTE
• When you made a sample print without changing
the settings, press the [Change P Settings] key,
then change the settings.
• To cancel the settings, press the [Initial Settings]
key. (The machine returns to the standard mode of
the Local Printing.)
4
Press the [Start Print] key.
If there is a current job or a previously reserved
job, the machine will start printing after that job is
completed.
(See "Printing Documents Stored in the Box," on p. 4-6.)
NOTE
• When you want to check the changed settings,
press the [Sample Print] key again.
Checking the Print Result or the Image of the Stored Document (Sample
When selecting one document and
printing without changing the settings
When selecting one document and
printing after changing the settings
When selecting multiple documents
and printing after changing the settings
4-89
Print)
Advertisement
Chapters
