Setting The Auto Shut-Off Time; Daily Inspection To Be Performed By The User - Canon NP6320 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
B.

Setting the Auto Shut-Off time

If the copier is not used for 30 minutes, the power will turn OFF automatically.
To turn the power back ON, press the Power Switch.
The Auto Shut-Off mode time can be set from 10 minutes to 2 hours.
1 Press the AE key for 5 seconds or more.
2 The default time selection ("A-4") is displayed on the control panel display.
3 Select the desired time setting with the ZOOM or Number key.
4 The selected timer setting ("A-1" thru "A-9") is shown on the control panel display.
Display A-1
Time [min]
10
5 Press the SORT key to store the timer settings and exit this mode.
6 Press the RESET key to exit without storing the timer setting.
C.

Daily Inspection to Be Performed by the User

Clean the following parts of the copier at least once per week or whenever copies are unclear.
• When cleaning the copier, first turn OFF the power switch and unplug the power plug.
Failure to observe these items may result in fire or electrical shock.
• Clean the copier using a firmly wrung-out cloth dampened with a mild cleansing detergent. Do
not use alcohol, benzene, paint thnner or other inflammable substances.
If inflammable substances come into contact with a high-voltage area inside the copier, this
may result in fire or electrical shock.
1. Copyboard Glass
Wipe the copyboard glass with a cloth dampened with water or a mild cleaning agent. Then
wipe with a dry cloth.
2. Copyboard Cover
Wipe the white surface on the underside of the copyboard cover with a cloth dampened with
water or a mild cleaning agent. Then wipe with a dry cloth.
1-10
COPYRIGHT © 1999 CANON INC.
A-2 A-3 A-4
15 20 30
Table 1-403
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
A-5 A-6 A-7
40 50 60
A-8 A-9
90 120