Omron LD-60 User Manual page 70

5.2 Considerations
when crossing thresholds or irregularities in the floor. Keep the payload centered on the plat-
form left-to-right, but biased toward the rear of the platform according to the following figures.
The following figure shows the platform's center of gravity, without payload structure.
Figure 5-4. Platform Center of Gravity (CG), (A) CG, (B) Wheel Axis (units are mm (inches))
The following figures show the calculated safe CG placements for payload structures with the
listed weights. The payload structure's CG, in each instance, needs to be within the area
shown. All units are mm.
NOTE: These figures show the limits of where to place the payload structure
CG. You should try to keep your CG as close to the center of these figures as pos-
sible.
60 kg
70 LD-60/90 Platform User's Manual 11970-000 Rev M