Omron LD-60 User Manual page 51

Chapter 3: Setup
Refer to the following figure:
Figure 3-20. Docking Station, (A) Wall Mount and (B) Wall Mount Bracket (units are mm [inches])
2. Screw the two shoulder bolts, each with a washer, into the rear of the docking station.
The shoulder bolts are M5 x 4, stainless steel. Their locations are shown in the fol-
lowing figure. Tighten to 9 N·m.
11970-000 Rev M LD-60/90 Platform User's Manual 51