Omron LD-60 User Manual page 47

The connectors for power and data go toward the rear of the platform.
4. Attach the battery power and data cables to the connectors at the rear of the battery.
Figure 3-18. Battery Cable Connectors, (A) Battery Charge Level, (B) Power Connector, (C) Data
5. Close the battery compartment door to secure the battery in place.
Closing the battery compartment door holds the battery tightly in place to keep it from
shifting inside the compartment.
6. Reinstall the battery door platform skin.
11970-000 Rev M
Figure 3-17. Lifting the Battery
Connector
LD-60/90 Platform User's Manual
Chapter 3: Setup
47