If the AMR is powered off, it will turn on automatically when pushed onto the docking station.
The robots can be turned off while on the docking station. If the robot is turned off, it must be
removed from the docking station to be started.
Indicators, Controls, and Connections
The docking station has a power switch and two LEDs:
blue indicates that power is available.
l
yellow indicates that a charge is in progress.
l
The power switch, located on the right side of the dock, has an integrated thermal fuse, which
can shut down the dock if it becomes too hot. If this happens, you have to wait for the fuse to
cool down, turn the switch to off (0) and then back to on (1).
11970-000 Rev M
Figure 7-3. Docking Station
LD-60/90 Platform User's Manual
Chapter 7: Operation
107