Omron LD-60 User Manual page 59

Access the SetNetGo OS through the MobilePlanner software:
MobilePlanner > SetNetGo > Networking
NOTE: You can use a web browser to connect directly to the SetNetGo OS on a
platform. This allows your IT support to set up the network for you, without
using MobilePlanner which requires a license.
IP Address, Netmask, Gateway, DNS1
Choose Static (DHCP is not recommended), and fill in the IP address, netmask, gateway, and
DNS1, as supplied by your network administrator.
NOTE: See your IT department for the following settings.
Radio Settings
SSID (e.g. AGV)
l
Fill in the appropriate wireless SSID for your wireless network.
The SSID is case sensitive.
Mode
l
Managed/STA, Ad-Hoc, or Master/AP
Radio Mode
l
Auto, 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac
Channel Set
l
Wireless Watchdog IP Address
l
Wireless Watchdog Max Count
l
0 disables this.
Security Settings
Encryption:
Disabled
l
WEP 64-bit
l
WEP 128-bit
l
TKIP/RC4
l
CCMP/AES
l
TKIP/CCMP/AES
l
Authentication:
OPEN
l
WPA-PSK
l
11970-000 Rev M LD-60/90 Platform User's Manual
Chapter 4: Configuration
59