5.2.4.4
Windows Command-line or Command Prompt Folder Creation
Select Start on the Windows taskbar and then do these steps:
1. Click Run... to open the Run window (or, depending on Windows OS version prior to
Windows 95, click the MS-DOS Prompt icon from the Main Menu).
2. Open a Command-line window:
•
•
•
3. From the c:\> prompt, type either "mkdir temp" or "md temp" (both "mkdir" and "md" mean
"make directory"), and then press Enter.
There will now be a "temp" folder created and available for placement of the firmware file
download.
Firmware Update
For Windows 95 or Windows 98 – type "command".
For any Windows OS versions later than Windows 98 – type "cmd" or
"command".
Alternately, from Start, select the All Programs > Accessories popup submenu,
and then select Command Prompt:
LBC-4000 L-Band Up/Down Converter System
5–8
Revision 6
MN-LBC-4000