Comtech EF Data LBC-4000 Installation And Operation Manual page 120

Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
Concise N/A 52 bytes,
Configuration numeric
Status
Serial Interface Operation
Description of Arguments
Command or
(Note that all arguments are ASCII
Response to
numeric codes between 48 and 57)
Query
Query only.
Use "CCS" to return a summarized version of the RCS query.
Returns status info in the form
"CCS_aaaaa.aaabb.bbcd.defffff.fffgg.gghi.ijklmnnnopqqqqrs{cr}{lf}"
where:
aaaaa.aaa=Conv A frequency in MHz
bb.bb=Conv A attenuation in dB
c=Conv A mute state (0=unmuted, 1=muted)
d.d=Conv A slope adjustment level
e=Conv A online/offline (redundancy)
fffff.fff=Conv B frequency in MHz
gg.gg=Conv B attenuation in dB
h=Conv B mute state (0=unmuted, 1=muted)
i.i=Conv B slope adjustment level
j=Conv B online/offline (redundancy)
k=Converter redundancy mode
l=auto fault recovery (1=auto, 0=manual)
m=External Ref present (0=none, 1=present)
nnn=Internal Ref Osc adjustment level (000-255)
o=remote mode (1=remote, 0=local)
p=remote interface (0=EIA-232, 1=EIA-485)
qqqq=remote address (0001-9999)
r=remote baud rate (0=38400, 1=19200, 2=9600, 3=4800,
4=2400, 5=1200)
s=remote data format (0=8N1, 1=7E2, 2=7O2)
LBC-4000 L-Band Up/Down Converter System
8–10
Revision 6
Response to Query Response to
Command (Instruction Query
(Target to Code and (Target to
Controller) Qualifier) Controller)
N/A CCS_a...s
CCS_
MN-LBC-4000