Chapter 4. Rear Panel Connectors; Overview - Cabling Connection Types; Coaxial Cable Connections; Figure 4-1. Coaxial Connector Examples - Comtech EF Data LBC-4000 Installation And Operation Manual

4.1 Overview – Cabling Connection Types
CEFD's LBC-4000/-ST L-Band Up/Down Converter System uses a number of different cables.
Each cable type is typically dedicated to a specific mode of operation.
•
•

4.1.1 Coaxial Cable Connections

(BOTTOM) Threaded Coupling Plug and Jack (Type 'N' Shown)
Rear Panel Connectors
Chapter 4. REAR PANEL
Not all of these operational interface types may be available.
The European EMC Directive (EN55022, EN50082-1) requires using
properly shielded cables for DATA I/O. These cables must be double-
shielded from end-to-end, ensuring a continuous ground shield.
(TOP) Bayonet Coupling Plug and Jack ('BNC' Shown)

Figure 4-1. Coaxial Connector Examples

LBC-4000 L-Band Up/Down Converter System
CONNECTORS
4–1
Revision 6
MN-LBC-4000