Power And Ground Connections; Power Interface Module - Standard Ac Unit; Ac Operation Prime Power Connection - Comtech EF Data LBC-4000 Installation And Operation Manual

4.2.3 Power and Ground Connections

4.2.3.1 Power Interface Module – Standard AC Unit
A detachable power cord, provided with the LBC-4000/ST, mates with the AC (Alternating
Current) Prime Power receptacle (Item 7, Figure 4-5 and Item 1, Figure 4-7) for connection to
90-125 VAC or 205-240 VAC power sources.
4.2.3.2

AC Operation Prime Power Connection

Do these steps to apply AC power to the unit (Figure 4-8):
1. Plug the provided AC power cord female end into the unit.
2. Plug the AC power cord male end into the user-supplied power source.
3. Switch the unit ON if so equipped (see Sect. 4.2.3.6). Otherwise, the unit energizes upon
plug-in to the AC power source.
Rear Panel Connectors
LBC-4000 L-Band Up/Down Converter System
Figure 4-7. AC Power
4–10
Revision 6
MN-LBC-4000