Use Windows Command-Line Or Command Prompt To Make A Folder - Comtech EF Data UT-4579 Installation And Operation Manual

UT-4579 X-Band Up Converter
Firmware Update
5.2.4.4 Use Windows Command-line or Command Prompt to
Make a Folder
Select Start on the Windows taskbar and then do these steps:
1. Click Run... to open the Run window (or, depending on Windows OS
version prior to Windows 95, click the MS-DOS Prompt icon from the
Main Menu).
2. Open a Command-line window:
• For Windows 95 or Windows 98 – type "command".
• For any Windows OS versions later than Windows 98 – type "cmd" or
"command".
• Alternately, from Start, select the All Programs > Accessories popup
submenu, and then select Command Prompt:
3. From the c:\> prompt, type either "mkdir temp" or "md temp" (both
"mkdir" and "md" mean "make directory"), and then press Enter.
There will now be a "temp" folder created and available for placement of the
firmware file download.
5–8
MN/UT4579.IOM
Revision 1