Appendix A. Lbc-4000 Up/Down Converter Idu Module Removal/Re-Installationa-1; Overview; Figure A-1. Lbc-4000 Chassis - Idu Module Bays - Comtech EF Data LBC-4000 Installation And Operation Manual

Appendix A. LBC-4000 UP/DOWN
REMOVAL/RE-INSTALLATION
A.1

Overview

This appendix illustrates the procedure required to remove and re-install an IDU module for the
LBC-4000 Up/Down Converter System into any LBC-4000 chassis (Figure A-1 shows a legacy
serial-only chassis with the top cover removed for clarity). This procedure is typical for removing
or installing a module into the LBC-4000's applicable Conv A or Conv B bay.
While Figure A-1 shows the legacy chassis (LBC-4000 L-Band Up/Down
Converter System without Ethernet), the procedures in this appendix apply
identically to the Ethernet-based LBC-4000.
Appendix A
CONVERTER IDU MODULE
Figure A-1. LBC-4000 Chassis – IDU Module Bays
LBC-4000 L-Band Up/Down Converter System
A–1
Revision 6
MN-LBC-4000