Comtech EF Data LBC-4000 Installation And Operation Manual page 100

System Account Access Information
Name fields can be any alphanumeric combination with a maximum length of 10 characters.
Password fields can be any alphanumeric combination with a maximum length of 10 characters.
Name
Read Only Name
Read Only Password
Read/Write Name
Read/Write Password
Admin Name
Admin Password
SMTP Server
SMTP Domain Name
SMTP Destination
Click [Submit Access] to save any changes.
Click [Reset] to revert to the previously assigned settings.
Webpage Timeout
To set an automatic timeout to safeguard access to an already logged-in unit, use the drop-down
list to set the time value as 5 minutes or 8 hours, and then click [Change].
The active session terminates if the unit remains idle (i.e., when no user activity occurs) beyond
the assigned Webpage Timeout. A valid user name and password is then required to resume the
HTTP Interface session.
Ethernet Interface Operation
The factory default is: monitor
The factory default is: 1234
The factory default is: opcenter
The factory default is: 1234
The factory default is: comtech
The factory default is: comtech
Specify the mail server IP address from where you want to send the e-mail.
The Administrator can assign the SMTP Domain Name and Destination. This is
required if the e-mail feature of the 'Home | Support' page (Sect. 7.5.1.3) is to be
used.
Specify the domain of the e-mail server (usually found to the right of the @ symbol in
an e-mail address).
The Administrator can assign the SMTP Domain Name and Destination. This is
required if the e-mail feature of the 'Home | Support' page (Sect. 7.5.1.3) is to be
used.
Specify the e-mail recipient name (usually found to the left of the @ symbol in an e-
mail address).
7–14
LBC-4000 L-Band Up/Down Converter System
Description
Revision 6
MN-LBC-4000