Chapter 3. Installation And Startup; Unpack And Inspect The Shipment - Comtech EF Data LBC-4000 Installation And Operation Manual

Chapter 3. INSTALLATION
3.1

Unpack and Inspect the Shipment

CAUTION
This equipment contains parts and assemblies sensitive to damage by
Electrostatic Discharge (ESD). Use ESD precautionary procedures when
handling the equipment.
Inspect the shipment. Do these steps:
1. Keep all shipping materials.
2. Check the packing list to make sure the shipment is complete.
3. Inspect the equipment for damage. If damage exists, immediately contact
4. Read the manual.
The LBC-4000/-ST and its power cord are packaged and shipped in a reusable cardboard carton
containing protective foam spacing (Figure 3-1). The Installation and Operation Manual can be
found on the CEFD website,
Installation and Startup
the carrier and CEFD to submit a damage report.
www.comtechefdata.com
LBC-4000 L-Band Up/Down Converter System
STARTUP
under the Download Manuals tab.
3–1
Revision 6
AND
MN-LBC-4000