Connect External Cables; Connect Prime Power; Converter Idu Modules Management - Comtech EF Data LBC-4000 Installation And Operation Manual

3.3

Connect External Cables

Chapter 4. REAR PANEL CONNECTIONS
Proceed to connect all external cables to the connectors outlined in the next chapter (Chapter 4.
REAR PANEL CONNECTIONS). Should difficulties occur, call CEFD Product Support for
assistance.
3.4

Connect Prime Power

An IEC-60320 Type C13 (female) three-prong plug power cord for 90-125VAC or 205-240VAC
power sources is provided with the converter. This detachable power cord mates with the AC
Prime Power Module IEC-60320 Type C14 male connector on the rear of the converter chassis.
3.5

Converter IDU Modules Management

Appendix A. UP/DOWN CONVERTER IDU MODULE REMOVAL/
RE-INSTALLATION
The LBC-4000 comes preassembled as ordered for the specific customer application. In the
event removal or replacement of the Up or Down Converter IDU Modules is required, complete
instructions are provided in Appendix A. UP/DOWN CONVERTER IDU MODULE
REMOVAL/RE-INSTALLATION.
Installation and Startup
LBC-4000 L-Band Up/Down Converter System
3–7
Revision 6
MN-LBC-4000