Comtech EF Data LBC-4000 Installation And Operation Manual page 75

6.3.3.2.3.1 (REMOTE:) ETHERNETADDRESS
Edit the Management IP Address and Range for the rear panel '10/100 ETHERNET' port. Use the
[][] arrow keys to select a digit, and then the [][] arrow keys to change its value. Press
[ENT].
6.3.3.2.3.2 (REMOTE:) ETHERNETGATEWAY
Edit the IP Gateway Address for the rear panel '10/100 ETHERNET' port. Use the [][] arrow
keys to select a digit, and then the [][] arrow keys to change its value. Press [ENT].
6.3.3.2.3.3 (REMOTE:) ETHERNETSNMP
Use the [][] arrow keys to select COMMUNITIES or TRAPS. Press [ENT].
(REMOTE:) ETHERNETSNMPCOMMUNITIES
Use the [][] arrow keys to select READ, WRITE, or TRAP. Press [ENT].
(REMOTE:) ETHERNETSNMPCOMMUNITIESREAD
View or edit the SNMP Read Community string. Use the [][] arrow keys to select a character,
and then the [][] arrow keys to edit that character. Press [ENT].
(REMOTE:) ETHERNETSNMPCOMMUNITIESWRITE
Front Panel Operation
IP Address/Range:
192.168.001.002/24
Ethernet IP Gateway:
192.168.001.002
COMMUNITIES TRAPS
SNMP Communities:
READ WRITE
Read Community:
public
Write Community:
private
LBC-4000 L-Band Up/Down Converter System
TRAP
6–11
Revision 6
MN-LBC-4000